Home Home Home Home Home Home Home Home
Vertical Raised Panel Bits
Vertical Raised Panel Bits
Vertical Raised Panel Bits
Vertical Raised Panel Bits
Vertical Raised Panel Bits
Vertical Raised Panel Bits

WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

[0, ] California Proposition 65

Vertical Raised Panel Bits

8/990.6

Use a sturdy 90° angle fence on your router table along with routers with a minimum speed of 1,7 KW (2-1/4 HP).
Routers as low-powered as 1,1 KW (1-1/2 HP) can be used but we suggest limiting their use to shorter, shallower runs.
 
Safety Tips:
the template must be at least 150mm and clamps should be used whenever possible.
Three to five passes are recommended to safely and accurately obtain the profile you desire.
 
Variations
Filter
Item Code Profile no. D I T L S Z MAT RH-LH
890.601.11
890.601.11 A 1-1/2'' 1-1/2'' 45/64'' 3'' 1/2'' 2 HW RH
890.602.11
890.602.11 B 1-1/2'' 1-1/2'' 45/64'' 3'' 1/2'' 2 HW RH
890.603.11
890.603.11 C 1-1/2'' 1-1/2'' 45/64'' 3'' 1/2'' 2 HW RH