Home Home Home Home Home Home Home Home
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits
Lock miter router bits

WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

[0, ] California Proposition 65

Lock miter router bits

8/955.503-504

These are the ultimate bits to craft sturdy miter joints thanks to anti-kickback design and tough tungsten carbide cutting edges.
By adding a second smaller bit, you can mill anywhere from 9,5mm to 28,5mm in thickness. A quick and easy way to accurately create boxes, stretcher bars, frames and any assortment of right angle or parallel joint projects.
You also have the advantage of using the same bit for parallel joinery projects.
To mill sturdy parallel glue joints follow step 1 shown in the illustration with the inside face of the workpiece laid flat on the table and centred to the bit.
To make the second part, lay 
the workpiece flat on the table and centred to the bit.
Mill with the inside face-up.
 
Watch the V-LOG video 855.503.11 
Variations
Filter
Item Code D I A T L S Z MAT RH-LH
855.504.11
855.504.11 2'' 7/8'' 45° "3/8"" ~ 3/4""" 2-3/8'' 1/2'' 2 HW RH
855.503.11
855.503.11 2-3/4'' 1-1/4'' 45° 19/32'' ~ 1-1/8'' 2-3/4'' 1/2'' 2 HW RH