Home Home Home Home Home Home Home Home
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits
Double-bearing spiral flush trim router bits

WARNING : Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer; Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including nickel, cobalt and lead, which are known to the State of California to cause cancer and lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

[0, ] California Proposition 65

Double-bearing spiral flush trim router bits

190/191/192B

CMT solid carbide spiral flush trim bits are composed of a special super-micrograin formulation increasing hardness with a higher transverse rupture point.
Combined with a spiral cutting angle, CMT solid carbide spiral flush trim bits equipped with a double bearing, allow cabinet makers to shear wood and wood products cleanly, providing more efficient chip ejection than standard flush trim bits.
In production settings, this means  these bits will run cooler, stay sharper, last longer and increase shop productivity.
Variations
Filter
Item Code Description I D L S Z MAT RH-LH 791.010.00 Safety collar Stop Collar Bearing
191.008.11B
191.008.11B Upcut 1'' 1/4'' 3'' 1/4'' 2 HWM RH 541.009.00 791.035.00
192.008.11B
192.008.11B Downcut 1'' 1/4'' 3'' 1/4'' 2 HWM RH 541.009.00 791.035.00
192.505.11B
192.505.11B Downcut 1-1/4'' 1/2'' 3-1/2'' 1/2'' 2 HWM RH 791.010.00 541.301.00
192.507.11B
192.507.11B Downcut 2'' 1/2'' 4-1/2'' 1/2'' 2 HWM RH 791.010.00 541.301.00
191.505.11B
191.505.11B Upcut 1-1/4'' 1/2'' 3-1/2'' 1/2'' 2 HWM RH 791.010.00 541.301.00
191.507.11B
191.507.11B Upcut 2'' 1/2'' 4-1/2'' 1/2'' 2 HWM RH 791.010.00 541.301.00
190.508.11B
190.508.11B Upcut & downcut 1-7/8'' 1/2'' 4-1/2'' 1/2'' 2 + 2 HWM RH 791.010.00 541.301.00